DIY Pull Out Drawers in the Kitchen Cabinets

We just wrapped up some simple DIY pull-out drawers in our kitchen cabinet – here’s the full tutorial and all the details on how we got it done!

This post is sponsored by Rockler. Thanks for supporting the brands that support Love & Renovations!

When we moved into this house one of our biggest initial complaints that we knew would create a unique challenge for us is that the pantry is awful.

It’s AWFUL.

It’s tiny, the door is off-center so you can’t really reach everything, and it’s just not super functional as an actual pantry space.

But! We do have more cabinets in this house than we even know what to do with, so I knew that it wouldn’t be too big of an issue to designate this little section of cabinetry next to our refrigerator as the pantry.

It has worked out for us really well so far, because we’re able to use the actual pantry as a storage closet for all of our small appliances and other random kitchen gear that doesn’t get used on the daily (which, in turn, frees up more cabinet space!). I feel like it’s kind of the best of both worlds, and the cabinet space has really been plenty for us.

The only problem? It’s hard to keep a cabinet pantry organized! And to compound things, Corey has a unique condition that triggers intense headaches if he bends over often to grab things. Since he’s the main cook in our house, it was always really annoying for him to get anything out of here (since you had to get down on the level with the cabinet and dig), and something really had to give.

So, we decided that we needed some pull-out drawers that would help keep things a little more organized and make it (way) easier for us to get what we need out of here!

You can easily purchase kits for this sort of thing, but it can be pretty pricey so we decided to make our own – it was definitely a project with some ups and downs but overall it was pretty straightforward and we’re so happy with how it turned out!

Here’s the full tutorial for how we built these DIY pull-out kitchen cabinet drawers, and the details on the super genius automatic lights we installed to make it even easier to see what we need.

DIY Pull-Out cabinet drawers

*Note: As usual, I shared a lot of this process (including some, ahem, learning moments) in my Instagram stories. If you want to catch up on the highlights and see it all play out in real time, you can click here to watch how it all went down!

Materials Needed

• 1/2″ plywood (1/4 sheet was plenty for the two drawers we made!)
• 1/4″ plywood (1/4 sheet is great here too)
• Wood glue
• Drill/driver + screws
• Clamps (always helpful to have in any project like this!)
• Rockler Clamp-Its
• Rockler Jig-It Undermount Drilling Guide
• Blum Soft-Close Undermount Drawer Slides

Determine your drawer size

Start off by measuring your cabinet and determining how large you want your pull-out drawers to be. We wanted to do two drawers in ours, because our cabinets are super wide and it feels much more organized to separate things out a bit.

When you’re measuring, be sure to take into account the spacing between the drawer slide and the drawer itself (you can see all of the specifications on the instruction page for the drawer slides!) – we forgot to do that and ended up having to re-make one of our drawers because it wouldn’t fit!

Our drawers are 4″ tall (tall enough to hold everything in place, but not so tall that we can’t see things), 21″ deep, and about 16″ wide (they’re two different sizes because of that measuring mistake).

Cut the four drawer sides + create a dado

Grab your 1/2″ plywood and cut the four drawer sides. Start off with strips of plywood that are your drawer height (in our case, 4″) – we used our circular saw to rip them down to the right size – a table saw would work too.

Then, cut them down to the right length. You’ll (obviously) need two pieces for the long sides and two for the short sides.

This is where things start to hurt my head a little bit, but stick with me, we’ll get through it together.

Start by deciding how wide you want the whole shebang to be (one of the sides). For example, if you’re doing two drawers, take the hinge-to-hinge measurement in your cabinet (to account for any lips in the cabinet or space the hinge takes up) and divide that by two. That’s how wide you want the entire set-up to be.

Now, to determine your drawer size. Take that initial measurement and subtract 42mm (or, 1 5/8″). That measurement should be the interior measurement of your drawer (NOT the exterior).

Clear as mud?

I found that the math/measuring part of this process was by far the hardest part for me, so just be sure to take it slowly, think it through, and be prepared to make a mistake or two. You’ll get there eventually!

Once you have your pieces cut to size, you can use your table saw to create a dado (a fancy woodworking term for a groove!) 1/2″ from the bottom of the drawer – we had to run ours through the table saw twice (moving it over 1/8″ the second time) to get it thick enough for the 1/4″ plywood to fit. I recommend using a scrap piece of wood as your test piece as you work on that!

While you’re at it, go ahead and cut the 1/4″ plywood for the base of your drawer. I recommend using a table saw or circular saw to get it done!

assemble your drawer

Now you’re ready to put the drawer together! We used wood glue and simply screwed into the sides of the drawers, but if you want it to be a little cleaner you could use pocket hole screws (we just didn’t have the right size and didn’t want to go to the store).

One thing that was hugely helpful in putting the drawers together was this set of Rockler Clamp-It Clips – they’re meant for perfectly lining up 90-degree angles and holding things in place for you, and they were a total life-saver for us. If you’ve got a bigger drawer you’re working with, you could also use this Clamp-It Corner Clamping Jig to make things really simple – ours were small enough that everything stayed in place just fine with the clips, though!

You’ll need to also create two notches on the back of the drawer for the slides to sit on. We just used our jigsaw to cut out a little piece, and we used the Jig-It referenced in the next step to know exactly how big to make it!

Attach drawer slide hardware

Once you’ve got your drawers assembled, it’s time to put them in your kitchen cabinets!

You’ll want to start by attaching the hardware to the bottom of the drawers. We used this Rockler Jig-It Undermount Drilling Guide and I honestly don’t know how you’d even do this without it – it made the process so incredibly quick and easy.

The jig helps drill the holes for the hardware that helps the drawer attach to the slide, and also drills the perfect holes for the pin on the drawer slides to fit into the wood. It would have been so challenging to measure perfectly for all of that without the jig, so I’d highly recommend it if you’re going to try this project!

install the drawer slides in the cabinet

Finally, you’re ready to put the drawer slides in your cabinet!

I was worried that this part would be really stressful and challenging, but overall it actually ended up being super simple! We had to attach a strip of wood to the base of our cabinets to raise the drawer slides off the base a bit (since our cabinets have a lip) – I just used some scrap plywood and it worked perfectly.

I recommend closely following the directions for the undermount drawer slides, but they can be a bit overwhelming to take in so here are the highlights (and note: this really only applies if you’re doing the same layout we did – if you’re doing one big drawer or a drawer higher up in the cabinet, the process is different!).

• If you have a framed cabinet like we do, you’ll need to measure the depth of your frame (and door hinge if it’s in the way like ours was) and push the drawer slide away from the wall by that much to make sure it opens.
• I found it was easiest to drive in the front screw (we used the screws that attach to the bottom of the cabinet, not the ones in the side), then adjust the back part so it was spaced exactly the same as the front, then screw in the back screw.
• Placing the second drawer slide is the part that really hurts your head. Here’s how we did it: take the measurement for the interior part of your drawer, then add 42mm (or 1 5/8″) to that to get your spacing. Measure from the outer side of one drawer slide to the outer side of another.
• Remember that you can always try again if you don’t place it perfectly the first time!

Again – if you’re just doing one big drawer, it’s much easier and there’s a little less brain-breaking math involved. Just reference the directions often, take your time, and you’ll get it!

A note: If you’re installing drawers higher up in the cabinets, this jig will be your best friend! We got one in case we ever decide to add an upper drawer (something I think I’d really like to do in a different cabinet – stay tuned!).

celebrate!

Once your drawer slides are in, all that’s left to do is place the drawer on top! This is the most satisfying part because the little click you get when it all pops into place will make you want to do a happy dance.

Just pull the drawer slides out all the way, set the drawer on top, and push it back until it clicks.

And just like that, you have pull-out cabinet drawers!

I feel so fancy with these drawers in my kitchen, and I can’t even begin to tell you how much I love them. My cabinet instantly feels a zillion times more organized, and I’m not sure how this happened but I swear I can fit more things in there now!

The final piece of the puzzle for me was adding these little LED Cabinet Hinge Lights – the lower cabinet gets pretty dark and I loved the idea of having some lights that automatically turn on when you open the doors! We actually realized at the last second that our hinges aren’t actually compatible with these (boo!) but I managed to rig up a system that works just fine. You can see how I did it in my Instagram story highlight if you want to try it yourself – but, if you’ve got compatible hinges they’re incredibly easy to install!

It was totally worth the extra effort needed because these little lights might be my favorite part of the whole project. I want to install them on every cabinet we have!

Next up on my kitchen agenda? CABINET AND DRAWER PULLS!

I’ve got them sitting in my garage and this has me so motivated to finally get it done. Keep an eye on my stories next week – I’m gonna make it happen!

The post DIY Pull Out Drawers in the Kitchen Cabinets appeared first on Love & Renovations.